Carbide Grade Selection
Hyperion Materials & Technologies manufactures a complete range of cemented tungsten carbide for metal cutting saw tips and strip blanks. See the grade property information below.
| Hyperion Grade | Grain Size | Hardness (HV30) | TRS* (N/mm2) | Typical Application |
| DZ05 | Extra fine | 1910 | 1710 | Nonferrous, clean cutting |
| AM70 | Extra fine | 1570 | 3750 | INCONEL®, Duplex stainless steel cutting |
| H6F | Extra fine | 1775 | 3500 | Nonferrous, clean cutting |
| H10F | Extra fine | 1600 | 3750 | General purpose cutting |
| H12F | Extra fine | 1490 | 3800 | General purpose cutting |
| H15F | Extra fine | 1380 | 3900 | General purpose cutting |
| CE05 | Fine | 1500 | 1650 | Ferrous, continuous cutting |
| CE14 | Fine | 1550 | 1680 | Ferrous, impact cutting |
| S10F | Fine | 1550 | 2600 | Cast iron cutting |
| H6N | Medium | 1600 | 2200 | Ferous, high impact cutting, rough cutting |
| DH40 | Medium | 1290 | 3300 | Ferrous, continuous / impact cutting |
| SM25 | Medium | 1525 | 3200 | Ferrous, continuous / impact cutting |
| SMA | Medium | 1600 | 1800 | Ferrous, continuous / impact cutting |
| SM35 | Medium | 1400 | 2000 | Ferrous, continuous / impact cutting |
| MP40 | Medium | 1390 | 2400 | Ferrous, continuous / impact cutting |
*TRS - transverse rupture strength
All data shown are typical values.
INCONEL is a registered trademark owned by Huntington Alloys Corporation in the US and elsewhere
Your Hyperion salesperson can offer their expertise in selecting the cemented carbide and saw tip or blank best suited to solve your needs.
